Field and Forest Products is pleased to announce that we have reached an agreement with Okuda Shiitake of Japan to distribute their sawdust spawn inoculation tools in the United States and Canada. Japan has been a leader in log based Shiitake cultivation since the 1940's and have applied their well-known quality precision machining to shiitake inoculation tools. While these tools cost a good deal more than our Wisconsin made palm and thumb style tools, the savings come to you with automation of the inoculation process. They deliver spawn fast, accurately, and three of the tools eliminate an extra step and the cost of wax application should you choose to use the foam capping version. When considering buying these tools, time as money might well be included into your cost-benefit calculations as well as getting inoculation done in a timely manner, taking advantage of prime log moisture content, and enabling faster spawn run.
During this past fall's inoculation, we were able to field test Okuda's inoculation line with the exception of the fully automatic inoculation machine. We found all the tools to be of excellent craftsmanship, as well as easy to use and maintain. Like anything new, these tools do have a learning curve, but are easily mastered. I'll give you a run down of each one. FAQs are at the end of the blog!
|Inoculation stick; the ultimate "dual tool"|
Okuda's Inoculation Stick is a compact (15 cm or just shy of 6 inches) stainless steel, hand held sawdust spawn inoculation tool. Its compact size enables the user to inoculate with one hand. Using the palm of the hand to exert downward pressure on the tool, sawdust spawn is forced into the inoculation site. This tool makes inoculating crooked or twisty logs easy to do as it frees your other hand to hold the log steady.
The spring gauge on the inoculation stick is such that only minimal pressure is needed to press down on the tool. A replacement spring comes with the tool and is easy to replace. The tool is very easy to clean and being stainless steel, cleans up to a like-new sparkle after each use. If I was looking for a tool that would last a lifetime and was planning on doing 100 or so logs a year, this would be the tool I'd buy. The inoculation sites can be sealed either with a foam cap or melted wax.
Our Thumb-Style and Palm-Style Inoculators, manufactured here locally, can be operated efficiently using thumb or palm (respectively), but not both (our Dual Tool Inoculator could be operated either way, but unfortunately, it is no longer available). These tools are a good value at a fraction of the cost, but the hands fatigue more quickly with the these tools and they require more frequent cleaning.
|The Palm-Style Inoculator requires two hands to operate.|
|The Thumb-Style Inoculator requires only one hand to operate.|
|The Okuda Hand Inoculator can fill and seal with the twitch of a finger.|
|The Okuda "Pegasus" is considered semi-automatic (vs. fully automatic)|
because you still have to drill holes for the spawn to be injected.
The rest is done with a simple squeeze of the finger!
If you'd like to check out a quick video we did featuring log inoculation tools side by side, click here).
Commonly Asked Questions
A foam cap as a sealant, really? That is the question most often posed to us concerning these tools. One solution to this question is that the Pegasus model is available with a wax option. That is, the spawn is delivered pneumatically, but then the inoculation sites would have to be waxed over using the Okuda Wax Applicator or similar device as a separate operation.
What about organic certification using foam caps? In 2007, when the status of clear cheese wax was under review by the National Organic Program, I asked what we could use as an alternative sealant. Their response was: Styrofoam. I was as shocked as you probably are. We have used Styrofoam caps for decades in our operation and if you come by to visit, you will be hard pressed to find them littering our laying or fruiting yard. We are running trials this winter to see what happens to the caps when they come in contact with either Wine Cap, a Pluerotus species or native organisms that are dwelling in our vermiculture boxes. So far, Wine Cap is doing a dandy job of running over Styrofoam caps incubated indoors in filter patch bags. We will see what is left of them in a few months!
What about the cost of caps verses wax? Foam caps are more cost efficient. For instance, to inoculate and seal 350 logs with foam caps the cost per log would be $0.17. To seal with wax, the cost per log would be $0.31 per log, not including the electricity required to melt the wax and the significantly higher shipping cost for the wax.
Okay, then, are there are any other things I should be aware of? Yes. Research by Okuda indicates faster spawn recovery and spawn run in using foam caps versus wax. We set up a trial to duplicate these results on our farm at the end of February.
Why the 13.5mm drill size? We have found that this increase in drill diameter speeds up spawn run as more wood is exposed to inoculum. Another benefit is that the first flush mushrooms from the inoculation sites are larger than those from smaller diameter inoculation sites.
We will let you know what we have to say about the fully automatic tool later in the month of March. By then, we should also be able to report back on our trial regarding different spawn sealant use, spawn run rates and costs per log.
The bottom line is that we offer a wide selection of tools for a variety of price ranges and workloads. Our locally made inoculation tools are solid, well made and the most economical choice for many growers. The Okuda inoculation tools take it up another notch, are built for a lifetime and run like clockwork. Regardless of your choice, purchase of any of our tools guarantees backup support from us here at F&FP; we will continue to use all of the tools we sell and you can always expect help from us, from proper operation instruction to valuable maintenance tips.